LevelOne GTL-5280 Manual de usuario descargar pdf (Pagina 74)

3-4.3 MSTI Priorities

When you implement an Spanning Tree protocol on the switch that the bridge instance. The

CIST is the default instance which is always active. For controls the bridge priority. Lower

numeric values have better priority. The bridge priority plus the MSTI instance number,

concatenated with the 6-byte MAC address of the switch forms a Bridege Identifier

The section describes it allows the user to inspect the current STP MSTI bridge instance

priority configurations, and possibly change them as well.

Web Interface

To configure the Spanning Tree MSTI Priorities parameters in the web interface:

1. Click Configuration, Spanning Tree, MSTI Priorities

2. Scroll the Priority maximum is 240. Default is 128.

3. Click the Apply to Apply the setting

4. If you want to cancel the setting then you need to click the Reset button.

It will revert to previously Saved values

Figure 3-4.3: The MSTI Configuration

Parameter description:

 MSTI :

The bridge instance. The CIST is the default instance, which is always active.

 Priority :

Controls the bridge priority. Lower numeric values have better priority. The

bridge priority plus the MSTI instance number, concatenated with the 6-byte

MAC address of the switch forms a Bridge Identifier.

 Buttons

Apply – Click to Apply changes.

Reset- Click to undo any changes made locally and revert to previously Saved

values.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 263 264

Sin comentarios

LevelOne GTL-5280 Manual de usuario Pagina 74