LevelOne NVR-1204 Guía de instalación descargar pdf (Pagina 65)

Network Video Recorder Administrator’s Manual

Set Event Rules

On Live screen, click Setup  click Event tab  select a camera.

1. Once a device is added to NVR server, the server would provide empty rules with

compatible trigger types for you to configure such as Motion 1, Motion 2, Motion 3,

DI 1, DI 2, Network Loss and Network Recovery. Select the Event Type, then click

“Set”.

2. Select the trigger type:

Trigger DO

Set the DO to become ON or OFF upon trigger, only the devices supporting DO functions

are available. Check the “Enable” to enable this function, and the device whose

connected DO(s) will be triggered. You may select one DO to be activated after the other

and the duration time between them. Clik “OK” to confirm.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 135 136

Sin comentarios

LevelOne NVR-1204 Guía de instalación Pagina 65