LevelOne NVR-1204 Guía de instalación descargar pdf (Pagina 47)

Network Video Recorder Administrator’s Manual

Edit PTZ Preset Tour

Preset Tour is a preconfigured PTZ sequence that directs the camera to cycle through

multiple preset points, including where to look and how long to look at each location. With this

preset tour, your PTZ device can perform an automatic patrol to scan through your cared

areas.

Before setting up Preset Tours, please make sure you have set

PTZ Preset Points. To start:

1. On PTZ Panel, click and then to enter Tour edit

window.

2. On Tour Setting window, select a Tour from drop-down list.

3. Select a Preset Point from drop-down list.

4. Set the Dwell Time, default is 10 seconds.

5. Click to save this point into the list.

6. Repeat step 1 ~ step 5 to add other points in your desired

movement sequence. You may use the edit buttons to change the point order or delete a

point. Click “Save” when this Tour list is well set. Click “Close” to exit this window.

7. The ID of a saved tour will appear red. Click on it to start the tour, and click to stop it.

Delete Add

Move

down

Move to bottom

Move up

Move to top

Start a Tour

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 135 136

Sin comentarios

LevelOne NVR-1204 Guía de instalación Pagina 47