LevelOne NVR-1204 Guía de instalación descargar pdf (Pagina 57)

Network Video Recorder Administrator’s Manual

Disk Management

NVR keeps the recordings on SATA hard disks installed in it. Whenever recording is taking

place, NVR writes data to one of the disks, and switch to the other as the original one is full.

Once the available space of the whole system is less than the reserved size, NVR will start

deleting the oldest file to make the amount of space allowing each active channel to record

for another 10 minutes.

You may observe the disk memory and recording status on Storage page.

On Live screen, click Setup  click System tab  click “Storage”. The connected storage

devices will be shown in the Storage Device list. Select a storage device to check its

Storage Information appearing as below.

Storage Device Types

● SATA1 represents the disk installed in upper bay for saving recordings.

● SATA2 represents the disk installed in lower bay for saving recordings.

● Storage Media represents the connected USB disk that you inserted for carrying

firmware image file, backup file, exported system log file, snapshots or video.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 135 136

Sin comentarios

LevelOne NVR-1204 Guía de instalación Pagina 57