LevelOne NVR-1204 Guía de instalación Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 136
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
Network Video Recorder Administrators Manual
49
Network Settings
There are two network interface cards in NVR. Either of these cards can be supported by the
built-in DHCP server feature, which enables NVR to assign IP addresses to cameras via
LAN1 or LAN2 port without another DHCP on router.
Go to Setup page Network tab
The current settings of both LANs will be displayed here.
By default, LAN1 card is set to Manual mode with a fixed IP address 192.168.0.10, while
LAN2 is in DHCP client mode. It is suggested that you connect LAN1 to LAN and connect
LAN2 to WAN.
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 135 136

Comentarios a estos manuales

Sin comentarios