LevelOne WAP-6002 Manual de usuario descargar pdf (Pagina 25)

Access Point Setup

Data - WEP Screen

WEP

Authentication

Normally, you can leave this at “Automatic”, so that Wireless Stations

can use either method ("Open System" or "Shared Key".).

If you wish to use a particular method, select the appropriate value -

"Open System" or "Shared Key". All Wireless stations must then be set

to use the same method.

Data

Encryption

Select the desired option, and ensure your Wireless stations have the

same setting:

 64 Bit (10 Hex char) - Keys are 10 Hex (5 ASCII) characters.

 128 Bit (26 Hex char) - Keys are 26 Hex (13 ASCII) characters.

Key

Select the key you wish to be the default. Transmitted data is

ALWAYS encrypted using the Default Key; the other Keys are for

decryption only.

You must enter a Key Value for the Default Key.

Key Value

Enter the key value or values you wish to use. The Key is required, the

other keys are optional. Other stations must have the same key.

Passphrase

If desired, you can generate a key from a phrase, instead of entering the

key value directly. Enter the desired phrase, and click the "Generate

Keys" button.

Security Settings - WPA-PSK

Like WEP, data is encrypted before transmission. WPA is more secure than WEP, and should

be used if possible. The PSK (Pre-shared Key) must be entered on each Wireless station. The

256Bit encryption key is derived from the PSK, and changes frequently.

Figure 18: WPA-PSK Wireless Security Screen

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 73 74

Sin comentarios

LevelOne WAP-6002 Manual de usuario Pagina 25