LevelOne WAP-6002 Manual de usuario descargar pdf (Pagina 13)

Access Point Setup

7. From the menu, check the following screens, and configure as necessary for your environ-

ment. Details of these screens and settings are described in the following sections of this

chapter.

8. You may also wish to set the admin password and administration connection options.

These are on the Password screen accessed from the main menu.

9. Use the Log Out and Restart buttons on the menu to apply your changes and restart the

Wireless Access Point.

Setup is now complete.

Wireless stations must now be set to match the Wireless Access Point. See Chapter 4 for details.

If you can't connect:

It is likely that your PC’s IP address is incompatible with the Wireless Access

Point’s IP address. This can happen if your LAN does not have a DHCP Server.

The default IP address of the Wireless Access Point is 192.168.0.1, with a Network

Mask of 255.255.255.0.

If your PC’s IP address is not compatible with this, you must change your PC’s IP

address to an unused value in the range 192.168.0.1 ~ 192.168.0.254, with a Net-

work Mask of 255.255.255.0. See Appendix C - Windows TCP/IP for details for

this procedure.

Setup Wizard

Click Setup Wizard in the main menu to help you simplify the configuration.

10. Step through the Wizard until finished.

 You need to know the SSID and security settings used by the APs. Check the data

carefully.

 Refer to the Wireless Mode Screen for more details.

11. If the connection fails:

 Check your data and all connections.

 Check that you have entered all data correctly.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 73 74

Sin comentarios

LevelOne WAP-6002 Manual de usuario Pagina 13