LevelOne GSW-2600TXM Manual de usuario descargar pdf (Pagina 53)

Modify Subnet

=============

VLAN : 1 Select

IP Address : 192.168.1.254

Subnet Mask : 255.255.255.0

Proxy ARP : DISABLED

RIP : DISABLED Advanced ...

OSPF : DISABLED Advanced ...

DVMRP : DISABLED Advanced ...

VLAN ID.

| READ/WRITE

Use <TAB> or arrow keys to move, other keys to make changes.

Configuring RIP

The Routing Information Protocol is used to specify how routers exchange routing table

information. (See “RIP and RIP-2 Dynamic Routing Protocols” on chapter 4.) When RIP

is enabled on this routing switch, it broadcasts RIP messages to all devices in the

network every 30 seconds, and updates its own routing table when RIP messages are

received from other routers. RIP messages contain both the IP address and a metric for

each destination network it knows about. The metric indicates the number of hops from

this device to the destination network.

You can use the following menu to specify authentication, the protocol used for sending

or receiving routing messages on this port, the default metric used in calculating the

best path, and enable or disable Poison Reverse.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 199 200

Sin comentarios

LevelOne GSW-2600TXM Manual de usuario Pagina 53