LevelOne GSW-2600TXM Manual de usuario descargar pdf (Pagina 21)

from a specified VLAN. If you select “Mgmt VLAN,” then select

Apply to display the VLAN ID field, select the required VLAN, and

then select Apply or OK to save your changes.

2.4.1.2.IP Connectivity Test (Ping)

Use the IP Connectivity Test to see if another site on the Internet can be reached. The

screen shown below is described in the following table.

Network Configuration: IP Connectivity Test (Ping)

=====================

IP Address : 0.0.0.0

Test Times : 0

Success : 0 Failure : 0

[Start] <CANCEL>

IP address to test. | READ/WRITE

Use <TAB> or arrow keys to move, other keys to make changes.

Parameter Description

IP Address IP address of the site you want to ping.

Test Times The number of ICMP echo requests to send to the specified site.

Range: 1~1000

Success / Failure The number of times the specified site has responded (or not) to

pinging.

Note:

The switch waits up to 10 seconds for a response to each ping.

2.4.1.3.HTTP Configuration

Use the HTTP Configuration screen to enable / disable the onboard Web agent.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 199 200

Sin comentarios

LevelOne GSW-2600TXM Manual de usuario Pagina 21