Levelone KVM-0410 Manual de usuario descargar pdf (Pagina 10)

LevelOne

next computer in sequence. The length of the Auto Scan interval

(Scan Rate) is adjustable. To abort the Auto Scan mode, press the

left Ctrl key twice.

Note: Scan Type determines whether an eye-marked computer is

to be displayed during Auto Scan.

% Manual Scan enables you to manually switch back and forth

between power-on

computers.

Left Ctrl + left Ctrl + F2

Press ↑ or ↓ to select the previous or the next computer in

sequence. And, press any other key to abort the Manual Scan.

Note: Scan Type determines whether an eye-marked computer is

to be displayed during Auto Scan.

% To adjust Scan Rate which sets the duration before switching to the

next computer in Auto Scan:

Left Ctrl + left Ctrl + F3

The KVM switch beeps one to four times indicating the scan interval

of 3, 8, 15 and 30 seconds respectively..

% To adjust keyboard typematic rate (characters/sec), this setting

over-rides that of BIOS and any operating system:

Left Ctrl + left Ctrl + F4

The KVM switch beeps 1 to 4 times corresponding to 10, 15, 20 and

30 characters/sec respectively.

% Audio Stick

An optional multimedia module can be LINKed to the back of each

KVM switch for selecting microphone and stereo speaker signals.

There are two options for Audio Stick: ON and Off. When set to

'On', audio selection follows computer selection. When set to 'Off',

audio selection stops following computer selection. It is useful if

you want to listen to a particular computer's audio signal while

operating other computers.

Left Ctrl + left Ctrl + F5

The KVM switch beeps once or twice corresponding to On and Off

respectively.

LevelOne

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Sin comentarios

Levelone KVM-0410 Manual de usuario Pagina 10