Levelone FPS-3003 Manual de usuario descargar pdf (Pagina 52)

 SNMP: You can set community and some parameters for

SNMP server. Furthermore, you can enable SNMP v3 for more

security.

 Set SNMP Configuration

 Authentic Community: set Community name of SNMP

server.

 Trap Community: set Trap Community name for SNMP

server to send trap packets.

 Trap Address: type an IP address to send the Trap packet.

 SysContact: type some letters for variable of SysContact

that represents the name of system contact.

 SysName: type some letters for variable of SysName that

represents the name of system.

 SysLocation: type some letters for variable of SysLocation

that represents the location of system.

 EnableAuthenTrap: type 1 or 2 for the variable of

EnableAuthenTrap that represents to enable (1) or disable (2)

to send Trap packets receiving the wrong Community name.

 SNMP V3

 Enable SNMP V3: select or clear Enable SnmpV3 support

 User Security name: set user security name of SNMP v3

 Auth Password: set authentication password of SNMP v3.

 Privacy Password: set privacy password of SNMP v3.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 74 75

Sin comentarios

Levelone FPS-3003 Manual de usuario Pagina 52